Projects
Trinity Lutheran Church Boiler Replacement
Trinity Lutheran Church consulted with CMR Mechanical to solve their boiler issues. The existing Viessman boilers were 80% efficient and had many mechanical issues. After careful consideration the Church chose to replace the system with Triangle Tube 95% efficient boilers.
Zingerman's Farm Project
We are proud to be actively restoring this property just outside the village of Dexter. CMR Mechanical was asked to install several heating and cooling systems in several buildings. This project will be completed in phases, once done it will be spectacular.
Cobblestone Farms Custom Home
Completed in May 2012 this home heating and cooling system has many options. Vertical loop geothermal, in-floor radiant heat, air handlers for air conditioning and a backup hi-efficient boiler.
New Construction Triangle Tube Boiler with Multiple Zones
This new home, located outside Dexter Michigan required a high efficiency boiler with multiple zones. The homeowner added an air handler for air conditioning.
Brown Home Two System Geothermal
This home located in Brighton, Mi. had a very elaborate heating and cooling system. Two 5 ton Climatemaster Geothermal systems were installed along side a 95% efficient Triangle Tube boiler. This system completely heats and cools the home as well as having snow melting capabilities for winter.
95% Efficient Boiler Installation with Domestic Hot Water
Replaced a Lochnivar Boiler with a new 95% Efficient Triangle Tube Boiler. This Boiler has Domestic Hot Water capability and it mounts on the wall for space saving in your mechanical room. This unit professionally installed by CMR Mechanical 734-424-9555.
McCrae Closed Loop Geothermal
This closed loop system was installed in the spring of 2011. The 5 ton system replaced two propane furnaces and two air conditioners. The customers also gained the benefit of domestic hot water being made from the waste heat from the geothermal system.
Furnace, Air Conditioner and Water Heater Replacement
This is a standard replacement for an older, outdated, and inefficient system. This system was 35 years old and badly needed to be replaced. It was updated with top of the line American Standard equipment, a Bradford White Water Heater, Honeywell Thermostat, Honeywell Media Filter and Honeywell Humidifier
Remodel Boiler with Pex Tubing Infloor Heat
This Ann Arbor home was completely remodeled and the heating system upgraded to a 95% efficient Triangle Tube boiler. Photos show pex tubing used for heating.
Hi-Velocity Air Conditioning System
This home has hot water heat and the homeowners wanted to add air conditioning. The home did not have any ductwork and CMR Mechanical was able to design and build a system in the attic that allowed cool air to be distributed throughout the home.
Farm House Boiler with Forced Air
This home was heated and cooled by a gas forced air furnace and air conditioner. The addition was built with infloor pex tubing and a hi-efficiency boiler with integrated domestic hot water was the chosen option. Since the existing older part of the home was forced air an air handler with a hot water coil continues to heat that area of the home. Air Conditioning was upgraded to a more efficient unit.
Dunkirk 84% Boiler Installation
This is a replacement boiler system. A Dunkirk system replaced a 30 plus year old boiler.
Ductless Heating and Cooling System
This home located in Ann Arbor has a hot water boiler for heating. The home had an existing ductwork system, but the ductwork had extensive mold issues and could not be used for air conditioning. The homeowner requested a ductless system installation. Mitsubishi makes an excellent product and the homeowner is extremely pleased with the installation.
CMR Commercial Projects
This is a collaboration of commercial projects that CMR has contracted. We offer service on any brand of heating,cooling, or refrigeration unit. Call us today at 734-424-9555. 24 Hour Emergency service at 734-424-1560.
Honeywell Generator Installation for Multiple Residences
A Homeowner consulted with CMR Mechanical about installing a standby generator for her residence and a farm house located next door. CMR Mechanical installed a 20 KW Honeywell Generator with two transfer switches to power both homes in the event of a power disruption. Honeywell makes one of the quietest generators on the market.
Kohler Back-Up Generator
This is a 14 Kw Kohler Back-Up Generator. It will automatically transfer the house load to the generator in the event of a power disruption. Kohler Generators do this through the automatic transfer switch. Most homes can be powered by a 14 Kw generator. Large homes with big electrical loads may require a 20 Kw generator. Installation can be done in about a day. For details call CMR Mechanical at 734-424-9555. We also do generator maintenance programs.
Space Pak Hi Velocity Air Conditioning System
This turn of the century home is heated by a hot water boiler system. The homeowners were making renovations and decided the air conditioning would be a nice addition. CMR was consulted and a Space Pak high velocity system was chosen as a way to distribute the cool air around the home.
Lake House Closed Loop Geothermal
Climatemaster Closed Loop Geothermal system installation. These pictures show the process of putting in a geothermal system. It requires burying a lot of pipe into the ground. These pipes transfer energy to the geothermal unit which heats and cools your home. As a bonus this system also makes domestic hot water which lowers your water heating bills.
Gilmore Open Loop Geothermal Replacement
Customer had an existing 21 year old Geothermal System that required the use of a drain field. The existing drain field was excavated and the material was removed. New peastone was added to unclog the rust and contaminents that had built up over 21 years of use. Most Open Loop systems do not use a drain field. The water is pumped up from a well, run through the system, and the waste water is drained into a pond or low lying area.
Second Home Get-Away
This home sits on 40 acres and is used as a second home get-away. The home was built with a oil forced air furnace with no A/C. The homeowner requested the addition of A/C as well as a way to keep the home comfortable during the cooler months. He also requested the ability to heat the home in the winter to avoid the possibility of freezing. A Mitsubishi Mini Split system fills all of the requirements, and is a very economical choice.
Finished Basement Ductwork
This is the correct way to finish a basement. It is extremely important to remember to include heating and cooling in your basement plans. Once the basement is finished it is hard to go back and do it again.
